Strip Pack Foil Manufacturer

The Strip foil Process is an innovative current process of removing tablets and capsules from blister packs, and is designed to provide solutions for both Pharmaceutical Manufacturers and Contract Packers and repackaging sector of the Retail Pharmacy business in Ahmedabad, India.

Our Company is child-resistant foils but also manufactures a rate of soft Aluminium Foils suitable for strip packaging of Pharmaceutical products such as Tablet, Capsules, etc.

Our company is one of the leading companies in manufacturing strip pack foils. We besides providing the customer with a wide range of strip pack foils also design as per the specifications of the customers. We belive that It is our duty to provide high quality Strip foils to our customers at less affordable rates.

Aluminium foil india manufactures a range of soft Aluminium Foils suitable for strip packaging of Pharmaceutical products such as Tablet, Capsules, etc. With the following general specifications. The final product specifications are made as per agreed contract with the customers.

Foil Material

Soft fully annealed aluminium alloy AA 8011 / AA 1200 conforming to Aluminium Association specification.

Std Foil Gauge Options	Tolerance(+/-8%)	Min. Bursting Strength
0.025 mm	+/- 0.002 mm	1.5 kg/sq. cm
0.030 mm	+/- 0.0024 mm	1.9 kg/sq. cm
0.040 mm	+/- 0.0032 mm	2.5 kg/sq. cm

Sealant

Colourless LDPE conforming to the applicable Government regulations regarding direct contact with medicines and drugs.

Standard Polymer Gauge	Nominal	Tolerances ( +/- 15% )
Options	GSM	GSM
150	34.39	+/- 5.16
180	41.27	+/- 6.19
200	45.85	+/- 6.88

Density Of LDPE	0.917 g/cc	Identification :	Each reel shall be identified with a sticker with Reel number, Specification, Net weight, Gross weight, Operator name & Date manufacture.
Peel Strength Of Lamination	200 g/15 mm min.	Packing :	Pharma foils are packed in cardboard carton. Relevant makings are provided on each outer Package.
Seal Strength Bet. Top & Bottom Foil	450 g/15 mm min.	Recommended operating conditions:	Sealing temperature : 130 to 150 deg. C Sealing pressure: 2.8 to 5.6 kg/Sq. cm, 40 to 80 lbs/Sq. inch Dwell time : 0.25 to 0.5 sec.
Printing & Lacquer Coating	Printed as per text, layout and approved by the Customer. For non-printed specification, clear Lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time.	Covering area of 1 kg finished material (nominal ) :	Gauge & Temper Foil 0.025 (soft) 0.03 (soft) 0.04 (soft)		Covering area in sq. mts/kg with 150 Gauge Polyethylene lamination 9.78 8.64 7.00
Configuration	Printed and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll.	Table Showing Thickness Tolerance of Foil:	Thickness mm		GSM
Winding Direction	Generally, printed or clear lacquer side is out in the finished reel.		Foil gauge	Min. (-8%)	Nominal	Max. (+8%)	Min. (-8%)	Nominal	Max. (+8%)
Core	Material options (a) Plastic (b) Aluminium (c) Card Board CORE ID: 76 mm +/- 0.5 mm. The length of the core is equal to the width of the web.		0.025 mm	0.023	0.025	0.027	62.33	67.75	73.17
Splices	Butt type made with 25 mm pressure sensitive tape.		0.03 mm	0.028	0.030	0.032	74.80	81.30	87.80
Splices	Butt type made with 25 mm pressure sensitive tape.		0.04 mm	0.037	0.040	0.043	99.73	108.4	117.07
Reel Outer Diameter	250 +/- 10 mm for slit material. 400 +/- 10 for Jumbos.	Thickness Tolerance of Polyethylene	Thickness mm		GSM
Reel Wander	Within +/- 1 mm		Foil gauge	Min.(-15%)	Nominal	Max.(+15%)	Min. (-15%)	Nominal	Max. (+15%)
Reel / Web Width	Plain : 45 mm to 800 mm with a tolerance of +/- 0.5 mm. Printed: 45 mm to 600 mm with a tolerance of +/- 0.5 mm.		150	0.0319	0.0375	0.0431	29.23	34.39	39.55
JointsPer Reel	Maximum 2. Average less than 1.		180	0.0383	0.045	0.0518	35.08	41.27	47.46
JointsPer Reel	Maximum 2. Average less than 1.		200	0.0425	0.05	0.0575	38.97	45.85	52.73
Pin Holes	Nil.	Test Certificates:	Test certificates giving the actual observed values of different parameters will accompany the supplies